Top reasons to use epotec epoxy for pools

Pools Painted with Epotec Sky colour
Pools Painted with Epotec Sky colour

There are number of maintenance issues associated with swimming pools. Maintaining the swimming pool in the best functional state is of primary importance. Not the least important issue among a host other issues is waterproofing. Water penetration into the structure of the swimming pool must always be prevented to preserve the structural integrity of the swimming pool. Failure to prevent water invasion leads to costly repairs. Thus, waterproof finishing of the inner surface of a swimming pool is important. Waterproof paint is a suitable finishing material for inner surfaces of swimming pools.

Epotec epoxy for pools is a pool-grade epoxy paint which has many beneficial characteristics. These characteristics make a strong case for it to be used in swimming pools.

Suitable for both concrete and fiberglass swimming pools

Epotec forms a hard impenetrable barrier over the inner surface of a concrete swimming pool which prevents the passage of water molecules. The paint binds strongly with concrete. As a result, water fails to reach the steel reinforcements used in concrete swimming pools thereby averting any risk of corrosion or damage. Therefore, epotec can be used for concrete swimming pool repairs for waterproofing.

Epotec epoxy paint is also highly suitable for waterproofing fiberglass ground swimming pool. The inner surface of a fiberglass swimming pool called the gel coat gets worn out or damaged with the passage of time. Epotec epoxy paint for fiberglass creates a strong barrier over the gel coat which does not allow water to pass through it. Therefore, water is not able to reach the fiberglass outer structure of the swimming pool. Damaged or worn out fiberglass swimming pools must be repaired by fiberglass pool repair contractors prior to waterproofing by epotec paint.

Epotec epoxy paint for concrete can also be used for the following types of swimming pools.

  • Fiberglass lined concrete swimming pools.
  • Concrete swimming pools with pebblecrete finish.
  • Concrete swimming pools with marblesheen finish.


Solid paint

Epotec epoxy paint forms a solid coating over the surface. The applied thickness of the coating remains the same over the years. This characteristic is at variance with conventional paints which tend to shrink. The primary reason for the solid nature of the paint is the presence of 100% solids in its chemical composition. This implies that no thinners or solvents are used in its manufacture.

Inert nature

Epotec epoxy paint can not only remain in immersed in water without getting affected adversely but can also withstand chemicals added to swimming pool to purify the water. This is due to chemically inert nature of the paint which prevents any kind of chemical reaction with any chemical.

Long life

The epotec paint coating can last for 7-14 years without the need for recoating. The life of the coating depends upon the applied thickness. Proper thickness of the coating ensures that it lasts for a long period of time.

Ease of application

Epotec epoxy paint comes in two tins. They can be mixed easily. Application is also easy because the paint flows out easily from brush or roller.

Wide colour option

A huge selection of epotec epoxy paint colours is available to suit different designs of swimming pools.


Epotec epoxy paint is much more superior than other types of finishes especially rendered finishes as evident by the point mentioned above.

High-grade epotec paint coating for swimming pools

High-grade epotec paint coating
High-grade epotec paint coating

Tiles and other types of finishes for swimming pools do not match the quality of epoxy paint coatings for swimming pools. The epotec epoxy paint coating not only protects the subsurface of the pool against water damage caused due to prolonged exposure to water but also prevents algae and other kinds of contamination from accumulating on the surface. The epoxy paint coating is also devoid of sharp edges and rough surfaces which may cause injury to the swimmers. Epotec epoxy paint coating is also available in a number of colours and designs.

Types of swimming pools covered

Concrete- Epotec epoxy concrete swimming pool coating Sydney prevents the pool water from invading the steel reinforcements that feature in the structure of all concrete pools. Water invasion leads to what is called concrete cancer and corrosion of the steel reinforcements. Thus, it is imperative to protect the structure of the concrete swimming pool against the ill effects of water. The chemical resistant property of the epotcec epoxy pool paint also makes it immune against the harmful effects of the chemicals such as chlorine commonly added to the water of a swimming pool.

Concrete swimming pools with different finishes can also be upgraded using epoxy paint coating. Two examples have been mentioned here.

Concrete swimming pools with pebblecrete finishing can be upgraded with epotec epoxy paint coating. Pebblecrete is a mixture of pebbles and white cement which is applied on the surface of concrete swimming pools. The surface layer of cement is removed using acid or a blast of water to expose the pebbles. The pebbles develop cracks and black stains due to wear and tear over the years. The pebbles can also detach completely. Upgrading the pebblecrete finish with epotec epoxy coating not only improves the level of water protection but also makes the finish long lasting and much smoother.

Concrete swimming pools with marblesheen finishing can also be upgraded with epotec expoxy paint coating. Many concrete swimming pools feature marblesheen finishing. Marblesheen is a mixture featuring crushed marble chips and white cement which is applied on the surface of a concrete swimming pool. The thickness can vary between 5mm and 20mm. Marblesheen can also undergo wear and tear and consequently degrade with the passage of time. The epotec epoxy coating reinforces the strength of the marblesheen finish and gives a long lasting and smooth surface.

Fiberglass- The fiberglass pools have a finished inner surface known as gel coat. The gel coat provides an impregnable barrier which cannot be penetrated by the pool water to enter the shell and other structures of the pool. However, the gel coat becomes weak within 10 or more because of osmosis damage, algae growth and general wear and tear. Black spots also develop on the gel coat. In such cases, epotec epoxy fiberglass pool paint can be used to resurface the fiberglass swimming pool after carrying out the repairs on the gel coat. This high-grade coating provides a hard and smooth finish for 7-14 years without the need to recoat.

Apart from conventional fiberglass pools, epotec epoxy paint coating can also be used to upgrade concrete swimming pools lined with fiberglass. Fiberglass layer of a concrete swimming pool can wear out and even detach from the concrete. Epoxy paint coating restores the effectiveness of the finish.



Thus, we can see that epotec epoxy paint coating is versatile in action when it comes to swimming pools. The advanced characteristics and ease of application also make it an excellent choice for pool protection.

No more worry about your pool painting with Epotec Pool Paintings from Diy Pool Paint

Epotec Pool Paintings from Diy Pool Paint
Pools Painted with Sky color.

If anybody wants to get maximum enjoyment from their swimming pool, they have to keep it in feet condition. It not only involves pumps, water, and filter to be taken care of; but also the painting that increases the beauty of pool enhancing its acceptability. Diy Pool Paint offers a numerous number of swimming pool paint that gives the maximal longevity to pool paintings. It’s Epotec Epoxy pool coating can benefit pool painting maximum with its lasting effect of 6-8 years or more than that.  This thickest pool painting can smoothen well to the previously applied rough paintings. Airline cracks in the surface of the pool and small pots are supremely cured by this Epoxy coating. It offers the smoothest surface of all kind of pool paint. Diy Pool Paint’s Epotec Epoxy Pool paintings being 98% solid it proffers thickness of around 320 microns while it is up to 150-200 microns for other paintings available in the market. By this way, it’s making a difference in the existing paint market and it is one step advanced to all other paintings. It is the best product for using on commercial, community, thermal pool and spa. Epotec Epoxy Swimming Pool Paint proffers clean service very easily minimizing the labor cost and money. Various Color can be obtained from Diy Pool Paint’s extended range of colors that includes Sky, Bondi, Tasman, Pacific, Pale Jade, Sherwood Green, Chamois, Gardenia, Slate Grey and so on. It bears supreme decorative, seamless and long-lasting effect that becomes very easy to clean pool surface. It’s providing required help in doing the paint of pool by the owner’s themselves at the maximum possible way. This service is called Do It Yourself (DIY) which is the unique services presented by Diy Pool Paint. Epotec is the best and advanced Epoxy Swimming Pool Painting that offers premier service for filling up the hairline cracks and pots on the surface of the pool. With the application of Epotec Epoxy coating, the pool surface becomes more attractive, decorative and smooth that had never been before. It is presenting more durability with just 2 coat of its use while it is required 3 coats for other paint products available in the market to bring the same thickness. This specially designed swimming pool painting restricts exceptionally the surface affection caused by chlorine, Chemical, and UV rays. A special formulation of it’s making keeps algae away from the surface of the pool and it is no more affected by oil and stain. The Epotec Epoxy pool painting is the optimal solution for getting the enduring effect to pool paintings with the bottom level cost. Its lasting effect removes the necessity of re-coating again and again. The Epoxy pool paint comes with warranty when it is applied through approved applicators. Diy Pool paint extends its services through advice, inspection, questioning which is completely free of cost. After applying the Epoxy coating the pool owner need not be worried about its maintenance for a long period of time. The Epotec coating from Diy Pool Paint is almost 100 percent solid and has no thinners or any kind of solvent. Therefore it does not evaporate in the air and stays almost completely under the water surface while other pool paints remain about 50 percent on the pool surface on which it is applied.